Car Styles
Elevette® 500
Metal frame with acrylic panels
(Machine Room elevator only)
(Click image for a larger view)
Elevette® 400
Solid wood with hardwood veneer raised or recessed center panels
(Machine Room or Machine Roomless elevator)
(Click image for a larger view)
Elevette® 300
Smooth hardwood center panels with crown, chair, baseboard and picture molding
(Machine Room or Machine Roomless elevator)
(Click image for a larger view)
Elevette® 200
Smooth hardwood veneer panels with square, flush corners
(Machine Room or Machine Roomless elevator)
(Click image for a larger view)
Elevette® 100
Aluminum frame with hardwood veneer or laminate veneer snap-in panels
(Machine Room elevator only)
(Click image for a larger view)
Shaft Configuration
No Shaft
Inclinator’s machine room elevators can be installed in an “open” environment – running up the center of open winding stairs, next to stairways and where no stairs exist. Elevette 500 car style is used for no shaft elevators.
Consult local codes.
In-Shaft
Most Inclinator elevators operate within an enclosed shaft. Occasionally, shafts are designed into projects and saved for future elevator installation. Prior to use as an elevator shaft, it can be used as closets stacked on top of each other. Elevette 400, 300, 200 and 100 car styles are used for in-shaft elevators.
Consult local codes.
Drive Systems
Machine Room Elevators
Cable Drum Drive
- Quietest in the industry
- Soft start enhancement
- Patented monorail guiding system
- 500 lb. and 750 lb. capacity
- Can accommodate car size up to 12 sq. feet.
Hydraulic Drive
- Smooth, quiet ride
- Patented monorail guiding system
- 750 lb. and 950 lb. capacity
- Can accommodate car size up to 15 sq. feet.
Car Operating Stations for Machine Room Elevators
Each elevator includes a Car Control Station. The faceplate will vary depending on finish selected and the number of elevator landings. A Remote Station is placed on each landing by the elevator door.
Machine Roomless Elevators
Historically, home elevators included a machine room that housed the drive system. This was a closet-sized room that was usually located at the lowest point of the elevator. Inclinator offers a drive system that is housed entirely in the hoistway (elevator shaft). This eliminates the need for a machine room, thereby taking up less square footage and reducing construction and installation costs.
Gear Motor Chain Drive
- Simple and reliable
- Chain for raising/lowering
- 950 lb. capacity
- Can accommodate car size up to 15 sq. feet.
- Double rail chassis
- Microprocessor-based controller
- Self-diagnostic
Car Operating Stations for Machine Roomless Elevators
Each elevator includes a Car Control Station. The faceplate will vary depending on finish selected and the number of elevator landings. A Remote Station is placed on each landing by the elevator door.
